Zm/Zml Series Slurry Pump Industrial Axial and Mixed Flow Circulation Pump Centrifugal Pumps Chemical Horizontal

• Customization: Available
• After-sales Service: Yes
• Warranty: 1years
• Model NO.: 100zm-45
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Pump Casing Combined: Horizontal Split Pumps
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Head: 7-120m
• Capacity: 7-2400m3/H
• Temperature: -20~180degrees
• Slurry: Particle 50
• Mixing: Double Stirring
• Passability: High
• Transport Package: Plywood Box
• Trademark: GuanFeng
• Origin: China, Jiangsu
• Production Capacity: 5000

Product Description

Product Description

 

General
As a single-stage-single-suction horizontal cantilever one, model ZM(slag) slurry pump is designed through ab-sorbing advantages of similar products from home and aboard. It is convenient to install and easy to disassemble and repair.
The pump head part: model ZM(slag) slurry pump has double pump casings in structure. That is to say, it is made up of front pump casing, back pump casing, front gua r plate, back guard plate, sheathing, shaft casing. The flow contact parts are made of JM3 materials, while the front and back pump casings are made of gray cast-iron or nodular ca st iron. The outlets of the pump can be installed at the interval of 45°, at eight an-gles, according to user's requirements. At the front and back cover plates there are back blades to lower leakage, so as extend the life and increase efficiency of the pump.
The shaft seal part: the shaft seal has two forms: shaft seal of auxiliary blade wheel and filling seal. The shaft seal of auxiliary blade wheel is featured with not thinning or e slurry,long life of seal and good effect of seal, etc. The filling seal has simple structure and is convenient to repair.
Drive part: Model ZM(slag) slurry pump can be directly driven. The bearing support, in combination with bearing body,has high strength in structure, big diameter of pump shaft, good flexibility, and short cantilever. Even if in bad working condi-tions, no bending and vibration can arise. Because of using heavy single-line cone roller bearing, it can stand axial and radial loads of the pump. The shaft is lubricated with oil. At both ends of the bearing body there are bearing covers, inside of which there is seal ring. The ring can effctively protect ore slurry from penetration and the lubricating oil from leaking. This can make sure that the bearing can run safely. In accordance with users' requirements, the drive part of the bearing can be in double - open type, and lubricated with thin oil. This can lower the temperature of the shaft.

 

Fjxv Large Flow Horizontal Centrifugal Industrial Chemical Axial/Mixed Flow Pump Water Pump Set

Welcome to Tengway Pump!
Our main products are: slurry pump, chemical pump, clean water pump, urban secondary water supply, rural sewage treatment and so on. Welcome to contact us!

Item Name	HW mixed flow pump (diesel engine water pump)
Application	Equipment for farmland irrigation and drainage, industrial and urban water supply and drainage
Horsepower	20HP-380HP
Structure	centrifugal
Power	high pressure
Delivery Time	Small order usually need 7-15 days, big order need negotiation.
Packaging Details	Wooden case or customized packaging
Payment Term	We receive Escrow, T/T, West Union, Cash and etc.

HW series Large Capacity Low Pressure Horizontal Mixed Flow Water Pump

Introduce
1.HW mixed flow pump is horizontal, single stage, single suction volute type pump; it is suitable for 
transporting clean water or similar chemical liquid whose temperature is under 50°C.

2.The mixed flow pump has the features of simple structure, reliable in operation, easy installation, 
high efficiency, small dimension, light weight.,

3.It is in high efficiency and energy saving type, mainly used for agricultural irrigation, sugar factory, 
paper making factory and can also be used for floods and rain water drainage.

4.The pump's performance range: flow 130~9000m/h, head 3.5~22m.Can be direct connection or belt pulley driven
by electric motor or diesel engine.

5.It is widely used in farmland irrigation, industrial and urban water supply, drainage and other occasions 

Data Sheet(Please Contact Us for More Models!)

Model	Flow(m3/h)	Head(m)	Power(Kw)	Speed(r/min)	Efficiency(%)
150HW-5	180	5	4	1450	82
150HW-8	180	8	5.5	1450	82
150HW-12	180	12.5	11	2900	82
200HW-5	360	5	7.5	1450	81.5
200HW-8	360	8	11	1450	83.5
200HW-12	360	12.5	18.5	1450	83.5
250HW-5	540	5	11	1180	82
250HW-8	540	8	18.5	1180	84
250HW-12	540	12.5	30	1180	84
300HW-5	792	5	15	970	83
300HW-8	792	8	22	970	85
300HW-12	792	12.5	37	970	85
400HW-8	1116	8.4	45	730	86
400HW-10	1400	9.94	55	730	86
500HW-6	1980	6.2	55	580	87
650HW-5	3312	5.1	75	485	85
650HW-7	3663	7.6	100	485	88
650HW-10	3322	9.7	115	490	88
800HW-10	5980	12.2	250	490	88
800HW-16	7200	17.7	450	590	88

 

Applications
Packaging & Shipping
Product packaging, boxing, nailing, loading, arrival at the port, transportation.

Support freight, air, sea, express and other transportation methods to provide you with better service, which is the purpose of our company!

Company Profile

                                            Guanfeng pump valve

Jiangsu Guanfeng Pump and Valve Technology Co., Ltd. is a chemical pump manufacturing enterprise that integrates scientific research, design, and production. Materials include special metal alloys such as 304, 316L, CD4MCu, 904, titanium, K-alloy, Hastelloy alloy, as well as engineering plastics such as high molecular weight polyethylene, F46, PP, PFA, etc. Suitable for the transportation of various complex working conditions such as acid, alkali, salt and other clear liquids and slurries. We mainly produce stainless steel submerged pumps, corrosion-resistant submerged pumps, long axis submerged pumps, and other products. The company is located in Xinqiao Town, Jingjiang City, Jiangsu Province, which is the production base for submerged pumps. The company's products are widely used in industries such as petroleum, sewage treatment, chemical engineering, fertilizers, pesticides, papermaking, printing and dyeing, pharmaceuticals, metallurgy, food, and water supply and drainage. Over the years, it has received high praise from a wide range of users.

 

                                                                                                                 FAQ

Q What kind of package do you provide?
A. We provide export plywood packing for our products.

Q How many days does it take for manufacturing?
A. It depends on order quantity and pump types. Normally it takes 30 120 days.

Q What payment term do you prefer?
A Normally we take payment term 30% T/T in advance, 70% paid before shipment. We can alsoaccept L/C at sightQ

Q What materials do you use to make your pumps?
A. We can use materials such as Ni-hard alloy, 1CR18NI9TI, 304L, CW-2, 316L, 904L, CD4MCUMM-4, 2507, double-phase steel series, J-1 alloy, JM3, JM6, Kazak B, C alloy, Monel alloy, Ti, Nialloy.
Q What is your warranty?
A. We provide 12 months warranty after commissioning or 18 months after delivery whichevercomes first